Saturday, April 4, 2015

How to increase ptcl Evo signals and speed





How to increase ptcl Evo signals and speed

Today we will learn how to get Good signals and good speed too.
I have tried various methods to make its signal more powerful.Here i will discuss only successful tries.

Method 1:
Use an antenna with your EVO/NITRO/Cloud.This antenna is easily available at PTCL ONE STOP SHOPS or PTCL authorized shops.you can buy this antenna in Rs.500/- only.

This antenna can give you a good reception.But keep the following things in mind while using this antenna.

Install this antenna at a higher distance approx. 60 feet from  ground.
Keep the length of the wire (attached with antenna)as shorter as  possible as it will save the signal loss caused by cable.
Do not use the antenna in thunder storms as it can damage your EVO or other electrical devices or cause serious injury to you.

Method 2:
Use you EVO/Nitro in open areas like near the doors,windows or at your roof if possible.
As i said that PTCL do not  have enough towers to give you good coverage.
Use an USB extension cable to use your EVO in open area or at roof.

Method 3:

Use a 3G router .
Using a 3G router has a couple of advantages,
You can use your device in open areas like at roof.
Your can share your EVO internet with other people via LAN Cables
You can get you wifi internet from your EVO.
I recommend some of the cheapest 3G routers



Tp-link TL-MR-3420
Tp-link TL-MR-3220
Tp-link TL-MR-3020
Tp-link TL-MR-3040

Method 4:
Take a naked copper wire of 10 cm length and twist it around the EVO as it will help you to fetch signals.It will also help you if you have no antenna port in your device.

Method 5:
Use a reflective plate at the back of your device and use it in the direction of your Exchange.
Check how these Methods worked For me.

Hope these methods will work for you as they did for me to Increase Ptcl evo signals and speed.


No comments:

Post a Comment